Skip to content
Back to Blog
Smart Factory
2026-11-097 min read17

Buy or Subscribe? Robot-as-a-Service from About KRW 800,000 a Month and the Spread of Rental–Robotics Partnerships: A Decision Guide for SME Manufacturers Weighing Total Cost, Ownership and Subsidy Eligibility (2026)

With Robot-as-a-Service now starting at about KRW 800,000 a month, SME manufacturers can bring in robots without large up-front capital. This guide shows how to compare five-year costs of buying, leasing and subscribing, then covers subsidy eligibility, the contract clauses to check, and a checklist for choosing the right model.

KITIM Consulting Team

Robots Without the Up-Front Capital

For SME manufacturers, the first hurdle in robot automation is usually the initial investment. New contract models are now lowering that hurdle. According to Hello T, Cmes Robotics and AJ Networks have launched Robot-as-a-Service (RaaS) rentals for four solutions, including AI depalletizing and piece picking, starting at about KRW 800,000 a month. Venture Square reports that the partnership between Fasto Robotics and AJ Networks divides the work: the robotics company supplies and maintains the robots, while the rental company handles financing and operations.

Under RaaS, you pay a subscription or a usage-based fee. Whether maintenance, software updates and part replacements are included in that fee, however, varies from contract to contract. Government robot support is also expanding beyond R&D into purchasing, demonstration and mass production. So far, though, we have not found a dedicated program that directly subsidizes RaaS rental fees.

Buy, Lease or Subscribe: How the Costs Compare

  • Buy: You need capital up front, and the robot becomes a depreciable asset. You handle maintenance yourself, but the longer you use the robot, the lower its average annual cost.
  • Finance lease vs. operating lease: A finance lease is accounted for much like a purchase, and ownership often transfers at the end of the term. An operating lease normally ends with the robot returned. Check the ownership-transfer terms and the accounting treatment with your tax advisor.
  • RaaS subscription: The fee is a fixed monthly operating expense (OPEX), and maintenance and replacements are often included. Minimum terms and early-termination penalties are what really determine the total cost.
  • Building a Five-Year Total Cost Comparison (Example: One Palletizing Robot)

    Once you have quotes, fill in the blanks below. Prices vary widely by vendor and specification, so compare only on the basis of actual quotes.

  • Buy: robot, peripherals and installation [ ] + annual maintenance [ ] × 5 + consumables and replacements [ ] − subsidy [ ] − residual value after five years [ ]
  • Subscribe: monthly fee [ ] × 60 months + installation and removal [ ] + services not included in the fee [ ]
  • For reference, paying the reported entry price of KRW 800,000 for 60 months adds up to KRW 48 million. Treat that figure as a benchmark to set next to your purchase quote. Actual fees depend on the solution and the contract terms.

    Where Subsidies and Subscriptions Collide

  • Programs such as robot-enabled manufacturing innovation and smart factory deployment generally assume you will buy and build the equipment. They also require you to keep that equipment during the post-project management period.
  • Whether rental or leasing costs count as eligible project expenses differs from program to program. Always check the eligible expense categories in each call for proposals.
  • If subsidized robots and subscribed robots share a line, keep separate asset registers. Also make sure you can tell which equipment produced which result when you report performance indicators.
  • Whether "subsidy + purchase" beats "subscription + your own funds" comes down to three factors: expected usage period, likelihood of process changes, and available cash.
  • Contract Clauses to Check Before You Subscribe

  • Term and exit: the minimum term, early-termination and return costs, and any buyout option at the end of the term, including how the buyout price is calculated
  • Service levels (SLA): the time from a fault report to a response, whether a replacement robot is provided, and how downtime is compensated
  • Data and continuity: who owns operational data and how you can export it, plus what happens if the vendor goes out of business
  • Safety responsibility: State in the contract who handles safety certification and risk assessment for the installation site. Even when the vendor owns the robot, workplace safety duties remain with the employer.
  • Which Model Fits Your Plant? A Decision Checklist

  • Subscription tends to win on high-mix lines or lines with volatile volumes where processes change often, and at the proof-of-concept (PoC) stage when you want to confirm the benefits first.
  • Purchase tends to win on fixed processes that run around the clock, and for equipment you will clearly use for the same purpose for five years or more.
  • A staged strategy: In year one, subscribe and measure the productivity gains. Then use that data to apply for a support program the following year and switch to buying. Proven results also make your business plan more convincing.
  • KITIM can compare robot adoption models against your processes and check whether the support programs open to you would accept each type of cost. If you are deciding between subscribing and buying, please feel free to contact the KITIM consulting team.

    RaaSRobot-as-a-ServiceRobot SubscriptionRobot RentalManufacturing Robot AdoptionRobot Manufacturing Innovation ProgramSME Manufacturers

    Related Posts

    Bio

    Korea's Incremental Modified Drug Criteria Revised After Four Years — MFDS Guideline Updated Oct 30, 2026 (Container Improvement Removed, Broader Non-PK Evidence, No Recognition for Simple Salt Changes): Development Planning and Evidence Design for Pharma SMEs Moving Beyond Generics

    MFDS revised its incremental modified drug recognition guideline on October 30, 2026, for the first time in four years: container improvement is gone, simple salt changes are explicitly excluded, and evidence beyond PK data can now count. This guide shows pharma SMEs how to reassess ongoing projects and design their evidence.

    2026-11-09
    Smart Factory

    The Government Pays for the Build, You Pay to Keep It Running — Software Subscriptions and AI Model Retraining Costs Outside the 2027 Manufacturing-AI Smart Factory Support, and How SMEs Should Budget 3–5 Years of Operation Before Applying

    The 2027 Manufacturing-AI Smart Factory program reportedly offers up to KRW 200 million (70% support outside the capital region), but software subscriptions and AI retraining costs fall outside its scope. This guide shows how to build a 3–5 year TCO table, negotiate vendor terms, and present an operating plan in your proposal before you apply.

    2026-11-09
    Government Programs

    Up to 50% of Facility Investment Covered by National and Local Funds — MOTIR's 3rd Call for the 'Advanced Strategic Industry Materials, Parts & Equipment SME and Mid-Tier Investment Grant' (Nov 5, Notice No. 2026-691), a Filing Guide from the Supply Chain Stabilization Item Certificate to Investment Plans and Local Matching for Semiconductor, Battery, Bio, Display, Robot and Defense Suppliers

    MOTIR's 3rd call (Notice No. 2026-691, Nov 5) for the Advanced Strategic Industry MPE Investment Grant covers up to 50% of facility and land investment with national and local funds. This guide walks through each filing step, from the supply chain stabilization item certificate to support rates, local matching and the investment plan.

    2026-11-09
    Updated daily

    Let AI find government support programs in this field

    Complete a 3-minute company assessment and we will recommend programs that fit your company, each with a match score. It is free.

    Get AI-Matched Programs for Free

    Need Consulting?

    Our technology innovation consultants will propose the optimal solution for your company.